RCN 2580 16384_海德汉编码器_heidenhain编码器_现货特价，提供海德汉技术服务。

欢迎咨询 189-1774-1718 。

德国heidenhain编码器RCN 2580 16384技术参数简介：

RCN 2580 16384 7KS12 W9 T 2.5 .. 23C 53A 64 01 .. D EnDat02 37 01
Product version Angle encoder with integral bearing  
Name RCN  
Model 2580  
Measuring standard DIADUR graduation on glass disk  
Measuring method absolute (singleturn)  
System accuracy ± 2.5"  
Maximum position error per signal period ± 0.4"  
Functional safety no specified value  
PFH no specified value  
Safe Position no specified value  
Mechanical device version Hollow shaft with integrated stator coupling  
Shaft type Hollow through shaft  
Shaft diameter 20 mm  
Flange version Rectangular flange with 85 mm centering collar, drainage channels, aluminum  
Interface EnDat 2.2  
Ordering designation EnDat02  
Positions per revolution 268435456 (28 bit)  
Electrical permissible speed ≤ 1500 min⁻¹  
Clock frequency ≤ 2 MHz  
Calculation time tcal 5 µs  
Incremental signals 1 Vpp  
Output signals per revolution 16384  
Cutoff frequency (-3 dB) ≥ 400 kHz  
Permissible cable length (with HEIDENHAIN cable) ≤ 150 m  
Power supply DC 3.6 V ... 14 V  
Typical current consumption without load ≤ 225 mA at 5 V  
Power consumption ≤ 1.1 W at 3.6 V 
≤ 1.4 W at 14 V  
Connecting direction tangential  
Electrical connection Flange socket Ultra-Lock, male, 12-pin  
Mechanical permissible speed ≤ 1500 min⁻¹  
Temporary mechanical permissible speed ≤ 3000 min⁻¹  
Starting torque at 20 °C ≤ 0.08 Nm  
Troque (friction) ≤ 3.3 Nm  
Moment of inertia of the rotor (shaft) 0.00018 kgm²  
Moment of inertia of the stator (housing/flange) 0.000670 kgm²  
Permissible axial motion of measured shaft ± 0.3 mm  
Natural frequency ≥ 1000 Hz  
Vibration 55 Hz to 2000 Hz (EN 60068-2-6) ≤ 200 m/s²  
Shock 6 ms (EN 60068-2-27) ≤ 200 m/s²  
Maximum operating temperature ≤ +50 °C  
Minimum operating temperature ≥ 0 °C  
Degree of protection IP 64 (EN 60529)  
Mass 1.0 kg 

RCN 2580 16384，海德汉编码器，heidenhain编码器，海德汉技术。