CET3-AP-CRA-AH-50X-SI-111346_安士能安全开关_哪里有现货特价？

欢迎咨询 189-1774-1718 。
安士能安全开关、CET3-AP-CRA-AH-50X-SI-111346技术资料简介：

Mechanical values and environment
Housing material
Slide Stainless steel
Safety switch housing Die-cast aluminum
Weight
Net 1 kg
Ambient temperature
At UB = 24V DC -20 ... 55 °C
Degree of protection IP67 Screwed tight plug connector/mating component
Resilience to vibration In acc. with EN IEC 60947-5-2
Mechanical life 1 x 106
Installation position Any Preferably head downward
Degree of freedom
Z ±4 mm
Y ±5 mm
X ±5 mm
Ready delay 1 s
Switching frequency max.0,5 Hz
Connection 2 plug connectors M12, 5-pin
Approach speed 20 m/min
Guard locking principle Closed-circuit current principle
Locking force Fmax 6500 N
Locking force FZh 5000 N
Electrical connection ratings
Operating voltage DC
UB 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%,="" pelv="">
LED 24 V DC  -15% ... 10%
Current consumption
IB 80 mA
ICM 480 mA
Utilization category according to EN 60947-5-2
DC-13 24V 200mA Caution: outputs must be protected with a free-wheeling diode in case of inductive loads
Solenoid operating voltage DC
UCM 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%,="" pelv="">
Fusing
External (operating voltage UB) 0,25 ... 2 A
External (solenoid operating voltage UCM) 0,5 ... 8 A
Power consumption
Solenoid max.12 W
EMC protection requirements In acc. with EN IEC 60947-5-3
Solenoid duty cycle 100 %
Degree of contamination (external, according to EN 60947-1) 3
Connecting cable 30V DC, 2A For UL requirement UL category code (CYJV/CYJV7)
Safety class
EN IEC 61140 III
Switching load
According to UL 24V DC, class 2 For alternatives see operating instructions
Safety outputs OA/OB
Type of output 2 semiconductor outputs, p-switching, short circuit-proof
Switching current
Per safety output OA / OB 1 ... 200 mA
Output voltage
High U(OA) / U(OB) UB-1,5V ... UB V DC
Low U(OA) / U(OB) 0 ... 1 V DC
Off-state current Ir max.0,25 mA
Risk time according to EN 60947-5-3
Single device max.400 ms
Switch-on time 400 ms
Discrepancy time
Both safety outputs max.10 ms
Operating distance

Repeat accuracy R
According to EN 60947-5-2 10 %
Miscellaneous
For the approval according to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions
Reliability values acc. to EN ISO 13849-1
Monitoring of guard locking and the safety guard position
Category
Head upward 3
Head downward or horizontal 4
Performance Level PL e
PFHD
Head upward 4.29 x 10-8
Head downward or horizontal 3.1 x 10-9
Control of the guard locking
Category Depending on external control of guard locking
Performance Level Depending on external control of guard locking
PFHD Depending on external control of guard locking。

CET3-AP-CRA-AH-50X-SI-111346，安士能安全开关。