8BVP0880HC00.004-1_贝加莱电源模块_现货特价，提供贝加莱技术资料。

欢迎咨询 189-1774-1718 。
贝加莱电源模块、8BVP0880HC00.004-1技术资料简介：

General information
B&R ID code 0xA6A1
Cooling and mounting method Cold plate or feed-through mounting
Slots for plug-in modules 2
Certifications
CE Yes
KC Yes
UL cULus E225616
Power conversion equipment
Mains connection
Network configurations TT, TN-S, TN-C-S 
Mains input voltage 3x 220 to 3x 480 VAC ±10%
Frequency 50 / 60 Hz ±4%
Installed load Max. 62 kW
Inrush current at 400 VAC Max. 133 A
Switch-on interval >300 s
Max. DC bus capacitance depending on mains voltage
230 VAC 34.8 mF
400 VAC 11.5 mF
480 VAC 8 mF
Nominal switching frequency 5 kHz
Possible switching frequencies 5 / 10 kHz
Integrated line filter per EN 61800-3, category C3 No
Integrated regeneration choke No
Capable of power regeneration Yes
Power factor correction (PFC) Yes
Variant
L1, L2, L3, PE M8 threaded bolt
Shield connection Yes
Connection cross section range
Flexible and fine-stranded wires --- 
Terminal cable cross section dimension of shield connection 32 to 50 mm
DC bus connection
Voltage
Nominal 750 VDC
Continuous power (supply and regeneration) 60 kW
Reduction of continuous power depending on mains input voltage
Mains input voltage <3x 400 VAC 150 W/V * (400 V - Mains input voltage)
Reduction of continuous power depending on DC bus voltage (UDC)
UDC <750 VDC 0.08 kW/V 
Reduction of continuous power depending on switching frequency and mounting method
Switching frequency 5 kHz
Cold plate mounting 1.3 kW/K (starting at 58°C) 
Feed-through mounting In preparation
Switching frequency 10 kHz
Cold plate mounting 0.95 kW/K (starting at 27°C)
Feed-through mounting In preparation
Reduction of continuous power depending on installation elevation
Starting at 500 m above sea level 6 kW per 1000 m
Peak power (supply and regeneration) 120 kW
Power dissipation depending on switching frequency
Switching frequency 5 kHz [0.065*P²+11.4*P+90] W
Switching frequency 10 kHz [0.22*P²+16.1*P+185] W
DC bus capacitance 1650 µF
Protective measures
Overload protection Yes
Short circuit and ground fault protection No
Variant ACOPOSmulti backplane
24 VDC power supply
Input voltage 25 VDC ±1.6%
Input capacitance 4.7 µF
Max. power consumption 27 W + PSLOT1 + PSLOT2 + P24 V Out + PFan8BVF... 
Variant ACOPOSmulti backplane
24 VDC Out
Quantity 2
Output voltage
DC bus voltage (UDC): 260 to 315 VDC 25 VDC * (UDC / 315)
DC bus voltage (UDC): 315 to 800 VDC 24 VDC ±6%
Fuse protection 250 mA (slow-blow) electronic, automatic reset
Filter fan connection
Output voltage 24 V +5.8% / -0.1%
Continuous current 4.2 A
Max. overcurrent limitation 10 A
Protective measures
Overload protection No
Short-circuit proof Yes
Open circuit monitoring No
Undervoltage monitoring No
Trigger inputs
Quantity 2
Wiring Sink
Electrical isolation
Input - Power supply module Yes
Input - Input Yes
Input voltage
Nominal 24 VDC
Maximum 30 VDC
Switching threshold
Low <5 V
High >15 V
Input current at nominal voltage Approx. 10 mA
Switching delay
Rising edge 52 μs ± 0.5 μs (digitally filtered)
Falling edge 53 μs ± 0.5 μs (digitally filtered)
Modulation compared to ground potential Max. ±38 V
Electrical properties
Discharge capacitance 0.9 µF
Operating conditions
Permissible mounting orientations
Hanging vertically Yes
Lying horizontally Yes
Standing horizontally No
Installation elevation above sea level
Nominal 0 to 500 m
Maximum 4000 m
Pollution degree per EN 61800-5-1 2 (non-conductive pollution)
Overvoltage category per EN 61800-5-1 III
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Nominal 5 to 40°C
Maximum 55°C
Storage -25 to 55°C
Transport -25 to 70°C
Relative humidity
Operation 5 to 85%
Storage 5 to 95%
Transport Max. 95% at 40°C
Mechanical properties
Dimensions
Width 213.5 mm
Height 317 mm
Depth
Cold plate 212 mm
Feed-through mounting 209 mm
Weight Approx. 7.9 kg
Module width 4。

8BVP0880HC00.004-1，贝加莱电源模块。