X20AO2622_贝加莱模块_现货特价，提供贝加莱技术资料。

欢迎咨询 189-1774-1718 。
贝加莱模块_X20AO2622技术资料简介：

General information
B&R ID code 0x1BA2
Status indicators I/O function per channel, operating state, module status
Diagnostics
Module run/error Yes, using status LED and software
Channel type Yes, using software
Power consumption
Bus 0.01 W
Internal I/O 1.1 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
KC Yes
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see user's manual)
FTZÚ 09 ATEX 0083X
DNV GL Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
LR ENV1
Analog outputs
Output ±10 V or 0 to 20 mA / 4 to 20 mA, via different terminal connections 
Max. output current 10 mA at voltages >5 V
15 mA at voltages <5 V
Digital converter resolution
Voltage ±12-bit
Current 12-bit
Conversion time 200 µs for all outputs
Settling time for output changes over entire range 1 ms
Switch on/off behavior Internal enable relay for booting
Max. error at 25°C
Voltage
Gain 0.15% 
Offset 0.05% 
Current
Gain 0.15% 
Offset 0.05% 
Output protection Short circuit protection
Output format
Voltage INT 0x8001 - 0x7FFF / 1 LSB = 0x0010 = 4.882 mV
Current INT 0x0000 - 0x7FFF / 1 LSB = 0x0010 = 9.766 µA
Load per channel
Voltage Max. ±10 mA, load ≥1 kΩ
Current Load max. 600 Ω (Rev. ≥ J0); 500 Ω (Rev. < J0)
Short-circuit proof Current limiting ±40 mA
Output filter 1st-order low pass / cutoff frequency 10 kHz
Max. gain drift
Voltage 0.02 %/°C 
Current 0.02 %/°C 
Max. offset drift
Voltage 0.032 %/°C 
Current 0.032 %/°C 
Error caused by load change
Voltage Max. 0.11%, from 10 MΩ → 1 kΩ, resistive
Current Max. 0.5%, from 1 Ω → 600 Ω, resistive
Nonlinearity <0.007% 
Isolation voltage between channel and bus 500 Veff
Electrical properties
Electrical isolation Channel isolated from bus
Channel not isolated from channel
Operating conditions
Mounting orientation
Horizontal Yes
Vertical Yes
Installation elevation above sea level
0 to 2000 m No limitations
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Temperature
Operation
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x X20TB06 or X20TB12 terminal block separately
Order 1x X20BM11 bus module separately
Spacing 12.5+0.2 mm。

X20AO2622，贝加莱模块。