LXM32MD18N4_施耐德伺服驱动器_Schneider伺服驱动器_哪里有现货特价？

欢迎咨询 189-1774-1718 。
施耐德伺服驱动器_Schneider伺服驱动器_LXM32MD18N4技术资料简介：

Main
range of product
Lexium 32
product or component type
Motion servo drive
device short name
LXM32M
format of the drive
Book
network number of phases
Three phase
[Us] rated supply voltage
200...240 V (- 15...10 %)
380...480 V (- 15...10 %)
supply voltage limits
170...264 V
323...528 V
supply frequency
50/60 Hz (- 5...5 %)
network frequency
47.5...63 Hz
EMC filter
Integrated
continuous output current
6 A (f = 8 kHz)
output current 3s peak
18 A for 5 s
30 A at 230 V for 5 s
maximum continuous power
1500 W at 230 V
2200 W at 230 V
nominal power
1.2 kW at 230 V (f = 8 kHz)
1.6 kW at 230 V (f = 8 kHz)
line current
4.5 A, THDI of 165 % at 480 V, without line choke
12.7 A, THDI of 135 % at 230 V, without line choke
9.9 A, THDI of 72 % at 115 V, with external line choke of 2 mH
14.1 A, THDI of 86 % at 230 V, with external line choke of 2 mH
Complementary
switching frequency
8 kHz
overvoltage category
III
leakage current
< 30 mA
output voltage
<= power supply voltage
electrical isolation
Between power and control
type of cable
Single-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR
electrical connection
Terminal cable 3 mm² AWG 12 (CN8)
Terminal cable 5 mm² AWG 10 (CN1)
Terminal cable 5 mm² AWG 10 (CN10)
tightening torque
0.5 N.m (CN8)
0.7 N.m (CN1)
0.7 N.m (CN10)
discrete input number
2 capture
2 safety
4 logic
discrete input type
Capture (CAP)
Logic (DI)
Safety (compliment of STO_A, compliment of STO_B)
sampling duration
0.25 ms
0.25 ms (DI) for discrete
discrete input voltage
24 V DC for capture
24 V DC for logic
24 V DC for safety
discrete input logic
Positive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
Positive (DI) at State 0: > 19 V at State 1: < 9 V conforming to EN/IEC 61131-2 type 1
Positive or negative (DI) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1
response time
<= 5 ms (compliment of STO_A, compliment of STO_B)
discrete output number
3
discrete output type
Logic (DO) 24 V DC
discrete output voltage
<= 30 V DC
discrete output logic
Positive or negative (DO) conforming to EN/IEC 61131-2
contact bounce time
<= 1 ms (compliment of STO_A, compliment of STO_B)
2 µs (CAP)
0.25 µs...1.5 ms (DI)
braking current
50 mA
response time on output
250 µs (DO) discrete
control signal type
Pulse train output (PTO) RS422 <= 500 kHz 100 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (open collector) <= 10 kHz 1 m
Pulse/direction (P/D), A/B, CW/CCW 5 V, 24 V link (push-pull) <= 200 kHz 10 m
Pulse/direction (P/D), A/B, CW/CCW RS422 <= 1000 kHz 100 m
Servo motor encoder feedback
protection type
Against reverse polarity :inputs signal
Against short-circuits :outputs signal
safety function
STO (safe torque off), integrated
SS1 (safe stop 1), with separated eSM safety card
SS2 (safe stop 2), with separated eSM safety card
SLS (safe limited speed), with separated eSM safety card
SOS (safe operating stop), with separated eSM safety card
safety level
SIL 3 conforming to EN/IEC 61508
PL = e conforming to ISO 13849-1
communication interface
Integrated Modbus
With separated communication card CANopen
With separated communication card CANmotion
With separated communication card Ethernet/IP
With separated communication card EtherCAT
With separated communication card Profibus
With separated communication card DeviceNet
With separated communication card I/O
connector type
RJ45 (labelled CN7) :Modbus
commissioning port
2-wire RS485 multidrop Modbus
transmission rate
9600, 19200, 38400 bps for bus length of <= 40 m Modbus
number of addresses
1...247 Modbus
status LED
1 LED (red) servo drive voltage
signalling function
Display of faults in 7 segments
marking
CE
operating position
Vertical +/- 10 degree
product compatibility
Servo motor BMH (70 mm, 3 motor stacks)
Servo motor BMH (100 mm, 1 motor stacks)
Servo motor BMH (100 mm, 2 motor stacks)
Servo motor BMH (100 mm, 3 motor stacks)
Servo motor BMH (140 mm, 1 motor stacks)
Servo motor BSH (70 mm, 2 motor stacks)
Servo motor BSH (100 mm, 1 motor stacks)
Servo motor BSH (100 mm, 2 motor stacks)
width
68 mm
height
270 mm
depth
237 mm
product weight
2.1 kg。

LXM32MD18N4，施耐德伺服驱动器，Schneider伺服驱动器。