X20CM0985_贝加莱模块_B&R模块_现货特价，提供贝加莱技术资料。

欢迎咨询 189-1774-1718 。
贝加莱模块_B&R模块_X20CM0985技术资料简介：

General information
B&R ID code 0x2433
Status indicators Channel status, operating status, module status
Diagnostics
Module run/error Yes, using status LED and software
Analog inputs Yes, using status LED (measurement range of analog inputs)
Digital outputs: Yes, using status LED and software
Overvoltage category ll 
Power consumption
Bus 1.4 W
Internal I/O 4 W
Additional power dissipation caused by actuators (resistive) [W] -
Certifications
CE Yes
KC Yes
EAC Yes
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
Digital outputs
Quantity 5
Variant FET positive switching
Nominal voltage 24 VDC
Switching voltage 24 VDC -15% / +20%
Nominal output current 0.1 A
Total nominal current 0.5 A
Connection type 1-wire connections
Output circuit Source
Output protection Thermal cutoff for overcurrent and short circuit
Diagnostic status Output monitoring with 10 ms delay
Leakage current when switched off 5 μA
Residual voltage <0.3 V at 0.1 A rated current
Peak short-circuit current <2 A
Switching on after overload or short-circuit cutoff Approx. 10 ms, depends on the module temperature
Switching delay
0 → 1 <300 μs
1 → 0 <300 μs
Switching frequency
Resistive load   Max. 100 Hz
Isolation voltage between channel and bus    500 Veff。

X20CM0985，贝加莱模块，B&R模块。